Scratched CD Repair?
I'm thinking that's going to skip.
2013 May Audio
When CD's were introduced, they were supposed to be "forever". More archival than vinyl or tapes, they said.
They're probably more archival than audio cassettes, but they can get scratched. Especially in a car where they're not handled that carefully.
In a previous article I talked about layer separation. This time we'll look at CD scratches and how to repair them.
Articles like this one exist through the help of readers like you, when you use any of the links on here to buy your gear. It doesn't add anything to your cost, and it helps this site stay on-line.
Thanks for your kind support!
In This Article
Why Repair CD's At All?
The Toothpaste Method
Motorized Repair Kits
Why Repair CD's?
Mainly, some of them go out of print and can't be obtained anymore.
The coating on compact discs has to be optically-clear and very thin. It might be more durable than some other types of plastic... but it's still going to scratch rather easily.
The Toothpaste Method
Can you really repair scratched discs with toothpaste? Yes, you can, but if you're looking at a CD like the one pictured above, that's going to set you back some hours. Also, it's important to wash the CD thoroughly to get all
traces of toothpaste out of the surface. All cleaning methods
will haze the protective layer, and this haze provides microscopic
places for residue to stick. This can make the CD's skip.
I've gone through just about every compact-disc cleaning method I could
think of. I've even tried using acetone to re-float the surface
(big mistake; don't try it.) After a long time, here's
what I've come up with.
1. Plastic polish
This works well, but only if you first deal with the scratches that are
bigger than the size of the polish particles. Many people don't
realize this. If your polish particles are only the size of
bowling balls, how long would it take you to polish away a scratch the size of the Grand Canyon? Too long!
First, you'll have to get yourself a set of ultra-fine sandpaper and
work down through the successively finer sizes. I'd pick up a
pack of 3M 03006 Wetordry (about five bucks here; also grab a container of Meguiar's #10 plastic polish through this link.)
Start with the 1000 or 1500 grit sandpaper, then finish with the 2000
and then perhaps the 2500.
This should go without saying, but always work from the coarser sandpaper (lower grit number) up through
the finer sandpaper (higher grit number). Work radially.
In other words: in straight lines out from the center toward the
edges. Don't go in a circular direction around the disc!
Use the sandpaper wet, with distilled water. Rinse the CD
(distilled water, preferably), then use the plastic polish with a soft
cloth. Obviously, don't use a coarse paper cloth.
2. Furniture wax
This is a temporary fix if you just want to rip the CD onto a computer so
you can make a good copy, but be careful. Many waxes have
volatile components. What this means is that they will evaporate
from your CD surface. They could
re-condense on the lens inside your CD player, though chances are this
won't happen if you let the wax dry for a while and buff away the
excess. (And don't use the discs in a hot car).
If you want to know the best wax on earth, get a container of this stuff right now. It's useful for so many things, and it doesn't have a
bunch of useless extra ingredients added to it (but just so you know,
real paste wax has its own hydrocarbon-y smell).
If there are deep scratches, any wax can leave visible residue when it dries. That's another reason why this is a temporary fix. There might be a narrow time window when you can recover the CD, and after that, it might not work anymore.
Furniture wax is great stuff for a number of uses; but for CD repairs, my favorite method is actually....
3. Motorized CD repair kits
The motorized kits and polishers are actually pretty good, if you're prepared run the
thing three or four times on a disc.
Make sure you spray the clean water on the cd each time. I have repaired a lot of CD's
with one of these, and I'm here to tell you it sure beats spending
three hours hand-polishing the plastic. If you have
scratched CD's, I suggest you click on this link and get yourself a SkipDr kit straightaway.
I know the CD's get a weird, radially-hazed look when you're done, but go back and look at that photo above. That was my
"Vintage Bluegrass" CD that had been skating around loose in the bottom
of a gritty plastic box in my car. It wouldn't play. After
the SkipDr, I was able to recover every song off it, without one
It did not remove all the deeper scratches, but it removed
enough that the player's error-correction mechanisms could take up the
Your mileage may vary, but this thing has saved a bunch of really scratched CD's.
One more thing... don't ever try to polish the top side (label side) of
a CD. The plastic is extremely thin there. Even a tiny
scratch can render the disc useless. I'm not sure how many people
would put the disc into a SkipDr upside-down, but if you do that, the
music will be toast, permanently.
This has been a look at some repair methods for scratched CD's.
I'm not saying you'll be able to repair everything with these methods,
but let's say 90%. There will be some discs that are so messed-up
that you'll just have to buy new ones, but at least you can fix most of
If you're shopping for music CD's, stereo equipment, cameras, or just about
anything else, it really helps me out if you use the links on this site
to buy your stuff.
Thanks for reading!
More From 120 Studio
Copyright 2013. All rights reserved.